6 Ways to Cover Up a Fireplace

6 Ways to Cover Up a Fireplace

Uninterested in your outdated, drab fire? Prepared to present your lounge a recent new look? Masking up a fire is a good way to remodel the house with out breaking the financial institution. Whether or not you are seeking to cover an unpleasant fireplace or just need to create a extra fashionable aesthetic, there are many methods to cowl up a fire that can fit your wants and magnificence. On this article, we’ll give you a complete information on how you can cowl up a fire, together with step-by-step directions, useful ideas, and provoking design concepts.

One of the vital issues to contemplate when masking up a fire is the fabric you are going to use. There are a selection of supplies you possibly can select from, relying in your finances, type, and the look you need to obtain. Drywall is an efficient alternative when you’re on a finances or if you’d like a extra conventional look. Paneling is a superb choice if you’d like one thing extra sturdy and simple to wash. Stone or tile can add a contact of luxurious and class to your house. As soon as you’ve got chosen your materials, you can begin the method of masking up the hearth.

In the event you’re masking up a fire with drywall, step one is to border out the opening. As soon as the framing is in place, you possibly can connect the drywall to the body utilizing drywall screws. You should definitely use a stage to verify the drywall is hung evenly. As soon as the drywall is hung, you possibly can end it by making use of joint compound and portray it. In the event you’re masking up the hearth with paneling, the method is analogous. Nonetheless, you will want to make use of paneling nails as an alternative of drywall screws. Stone or tile could be put in immediately over the prevailing fire encompass. Nonetheless, you will want to verify the floor is clear and stage earlier than you start. As soon as the stone or tile is put in, you possibly can grout the joints and seal the floor.

Sealing the Brickwork

Earlier than you possibly can cowl up your fire, you must seal the brickwork and smoke chamber to stop drafts and moisture from getting into your private home. To do that, you will have the next supplies:

  • A stiff brush
  • A vacuum cleaner
  • A masonry sealant
  • A paintbrush or curler
  • First, use the stiff brush to take away any unfastened particles from the brickwork and smoke chamber. Then, vacuum the realm to take away any remaining mud or grime. Subsequent, apply a thick layer of masonry sealant to the brickwork and smoke chamber utilizing the paintbrush or curler. You should definitely get into all of the cracks and crevices. Permit the sealant to dry utterly earlier than persevering with.

    Sealing the Smoke Chamber

    The smoke chamber is the realm above the hearth opening the place smoke and gases exit the home. It is very important seal the smoke chamber to stop drafts and moisture from getting into your private home. To do that, you will have the next supplies:

  • A metallic plate
  • Masonry screws
  • A drill
  • A screwdriver
  • First, reduce the metallic plate to suit the opening of the smoke chamber. Then, drill holes within the metallic plate and the smoke chamber. Subsequent, safe the metallic plate to the smoke chamber utilizing the masonry screws. Lastly, seal the perimeters of the metallic plate with a bead of caulk.

    Filling the Fire Opening

    As soon as you’ve got determined to cowl up your fire, step one is to fill within the opening. This can assist to seal the house and forestall drafts. There are a number of alternative ways to fill the opening, relying on the scale and form of your fire.

    For small fireplaces, you need to use a bit of plywood or drywall.

    Reduce the wooden or drywall to suit the opening and safe it in place with screws or nails. You might want to make use of a number of items of wooden or drywall to fill the opening utterly.

    For bigger fireplaces, you need to use a extra substantial materials, resembling concrete blocks or bricks.

    Stack the blocks or bricks within the opening and mortar them collectively. You might want to make use of a number of programs of blocks or bricks to fill the opening utterly.

    As soon as you’ve got stuffed the opening, you possibly can end it off by making use of a layer of drywall or plaster.

    This can give the opening a clean, completed look. You may then paint or wallpaper the opening to match the remainder of your room.

    Here’s a desk summarizing the completely different supplies you need to use to fill a fire opening:

    | Materials | Execs | Cons |
    |—|—|—|
    | Plywood | Cheap, straightforward to chop and set up | Not as sturdy as different supplies |
    | Drywall | Much like plywood, however extra fire-resistant | Not as robust as different supplies |
    | Concrete blocks | Sturdy, fire-resistant | Heavy, troublesome to chop and set up |
    | Bricks | Much like concrete blocks, however dearer | Heavier, tougher to chop and set up |

    Refinishing the Encompass

    If the hearth encompass is in good situation however merely would not match your type, refinishing it’s a cost-effective solution to replace its look. Listed here are the steps concerned:

    1. Clear the encompass: Take away any grime or particles from the encompass utilizing a gentle cleansing answer.
    2. Sand the floor: Calmly sand the floor of the encompass with fine-grit sandpaper to take away any imperfections.
    3. Apply primer: Apply a coat of primer to the encompass to assist the paint adhere higher.
    4. Paint the encompass: Select a paint colour that enhances your décor and apply two to a few coats, permitting every coat to dry utterly earlier than making use of the following.
    5. Add gildings (elective): If desired, you possibly can add gildings resembling molding or tiles to the encompass to additional customise its look.
    6. Seal the encompass: As soon as the paint has dried utterly, apply a transparent sealant to guard the end.
    Instrument Description
    Sandpaper High-quality-grit sandpaper for smoothing the floor
    Primer Base coat to enhance paint adhesion
    Paint Shade of your alternative to reinforce look
    Molding or tiles (elective) Ornamental components to customise the encompass
    Clear sealant Protecting coating to protect the end

    The way to Cowl Up a Fire

    Fireplaces are an exquisite and basic addition to any residence, however they will also be a hazard, particularly when you have younger youngsters or pets. In the event you’re in search of a solution to cowl up your fire and make it safer, there are a number of completely different choices to select from.

    Fire screens are a good way to cowl up your fire and maintain sparks and embers from flying out. They’re out there in a wide range of kinds and supplies, so you’ll find one which matches your décor. Fire screens are additionally comparatively straightforward to put in, so you are able to do it your self in a matter of minutes.

    Fire covers are an alternative choice for masking up your fire. They’re fabricated from a heavy-duty materials, resembling canvas or vinyl, they usually match snugly over the opening of your fire. Fire covers are tougher to put in than fire screens, however they provide extra safety from warmth and sparks. They could be a good security barrier close to youngsters and pets.

    In the event you’re undecided which sort of hearth cowl is best for you, you possibly can at all times seek the advice of with knowledgeable fire installer. They will help you select the best choice to your wants and set up it safely.

    Folks Additionally Ask

    What’s one of the simplest ways to cowl up a fire?

    One of the simplest ways to cowl up a fire is dependent upon your wants and preferences. In the event you’re in search of a fast and simple answer, a fire display screen is an efficient choice. In the event you want extra safety from warmth and sparks, a fire cowl is a better option.

    How do I set up a fire display screen or cowl?

    Fire screens are usually put in by hanging them from the mantel or fire opening. Fire covers are often put in by inserting them over the opening of the hearth and securing them with screws or bolts.

    Can I cowl up a fire with drywall?

    Sure, you possibly can cowl up a fire with drywall. Nonetheless, it is vital to notice that drywall just isn’t fire-resistant, so you might have to take extra precautions to make sure the protection of your private home.