With regards to furnishings, dressers are probably the most vital items. They supply storage for garments, linens, and different objects, and so they can even add a contact of favor to a room. Nonetheless, if you want to transfer your dresser or if you wish to clear it completely, you might must take away the drawers. Whereas this may occasionally look like a frightening activity, it’s truly fairly easy. With a number of easy instruments and a little bit endurance, you possibly can simply take away the drawers out of your dresser and put them again in place.
Earlier than you start, you will need to collect the required instruments. You will have a screwdriver, a hammer, and a pair of pliers. After getting your instruments, you possibly can start the method of eradicating the drawers. Step one is to take away the drawer stops. These are small items of wooden or steel which can be situated behind the drawer and forestall it from being pulled out too far. To take away the drawer stops, merely use a screwdriver to unscrew them.
As soon as the drawer stops have been eliminated, you possibly can start to drag out the drawers. Nonetheless, you will need to watch out to not pull too onerous, as you may injury the dresser. As an alternative, gently pull on the drawer till it comes out about midway. Then, raise the entrance of the drawer up barely and proceed to drag till it’s utterly out of the dresser. As soon as all the drawers have been eliminated, you possibly can clear them and the dresser itself. To wash the drawers, merely use a gentle cleaning soap and water answer. To wash the dresser, you need to use a furnishings polish.
Security First
Earlier than you start eradicating the drawers from a dresser, it is vital to take a number of security precautions. Listed here are some issues to remember:
1. Be certain the dresser is secure and will not tip over. If the dresser is heavy, ask somebody that will help you transfer it.
• Clear an area in entrance of the dresser so you may have room to work.
• Take away all the objects from the drawers. It will make the drawers lighter and simpler to take away.
• If the drawers are caught, don’t drive them. You could possibly injury the dresser or the drawers.
• Watch out to not pinch your fingers when eradicating the drawers.
• Put on gloves to guard your fingers from splinters or sharp edges.
Use the Proper Instruments
– You will have a screwdriver to take away the screws that maintain the drawers in place.
– A hammer could also be useful if the screws are tight.
– A flashlight could also be useful if the dresser is in a darkish space.
Be Affected person
– Eradicating drawers from a dresser can take time. Do not get pissed off if you aren’t getting it proper the primary time.
– When you have any hassle, seek the advice of knowledgeable.
Collect Important Instruments
For safely eradicating dresser drawers, the important instruments required are as follows:
1. Screwdriver: A flat-head or Phillips-head screwdriver, relying on the kind of screws holding the drawer in place
2. Pliers: A pair of pliers with a gripping or locking mechanism for holding and eradicating small components, corresponding to nails or tacks.
Security First
Earlier than eradicating dresser drawers, guarantee the next security measures:
• Empty all drawers of their contents to forestall injury or harm.
• Place a smooth fabric or blanket on the ground beneath the dresser for defense.
• If the drawers are heavy, search help from one other particular person for help.
3. Hammer or Nail Setter: A hammer or nail setter for tapping out cussed nails or tacks.
4. Gloves: A pair of labor gloves for shielding fingers from splinters or sharp edges.
5. Flashlight: A flashlight for illuminating the hidden areas beneath the drawers.
6. Two Furnishings Sliders: Furnishings sliders will be positioned beneath the entrance of the drawer to assist transfer it extra simply.
7. Pry Bar or Flathead Screwdriver: A small pry bar or flathead screwdriver can be utilized to softly raise the drawer from its rails.
Slide Drawer to the Heart
With the drawer barely open, press in on each side of the drawer, making use of equal strain.
Slide the drawer out and in whereas making use of strain.
Proceed sliding the drawer out and in till it’s utterly centered.
As soon as the drawer is centered, you need to have the ability to raise it straight up and out of the dresser.
To place the drawer again in, merely reverse the method.
Here’s a desk summarizing the steps:
| Step | Description |
|---|---|
| 1 | Press in on each side of the drawer and apply equal strain. |
| 2 | Slide the drawer out and in whereas making use of strain. |
| 3 | Proceed sliding the drawer out and in till it’s utterly centered. |
| 4 | Elevate the drawer straight up and out of the dresser. |
Take away Entrance Panel
The entrance panel of the drawer is usually held in place by two screws. Utilizing a screwdriver, take away these screws and set them apart. As soon as the screws are eliminated, rigorously raise the entrance panel off the drawer. Watch out to not injury the panel or the drawer itself.
Extra Suggestions for Eradicating the Entrance Panel
- If the entrance panel is caught, you possibly can strive utilizing a putty knife to softly pry it unfastened.
- If the screws are rusted or stripped, you might want to make use of a pair of pliers to take away them.
- Be sure you help the drawer when eradicating the entrance panel to forestall it from falling.
| Drawer Measurement | Variety of Screws |
|---|---|
| Small | 2 |
| Medium | 4 |
| Giant | 6 |
Examine for Drawer Stops
Earlier than eradicating the drawers, test if they’ve drawer stops put in. Drawer stops are small plastic or steel brackets that forestall the drawers from being pulled out too far. In case your dresser has drawer stops, you’ll need to launch them earlier than you possibly can take away the drawers.
Step 1: Find the Drawer Stops
The drawer stops are sometimes situated on the within of the drawer slides, close to the again of the drawer. They could be hooked up with screws or clips.
Step 2: Launch the Drawer Stops
If the drawer stops are hooked up with screws, use a screwdriver to take away the screws. If the drawer stops are hooked up with clips, merely squeeze the clips collectively to launch the drawer cease.
Step 3: Take away the Drawer Stops
As soon as the drawer stops are launched, you possibly can take away them from the drawer slides. Watch out to not lose the drawer stops, as you’ll need them to reinstall the drawers later.
| Sort of Drawer Cease | Methods to Launch |
|---|---|
| Screw-on Drawer Cease | Use a screwdriver to take away the screws. |
| Clip-on Drawer Cease | Squeeze the clips collectively to launch the drawer cease. |
Reattach Drawer Entrance
9. Reattach the drawer entrance by aligning it with the drawer and guaranteeing the sides match snugly into the grooves.
Use the next steps to make sure a safe and sturdy reattachment:
- Elevate the drawer entrance barely and slide it into the grooves. The sides of the drawer entrance ought to match snugly into the grooves across the perimeter of the drawer.
- Faucet the drawer entrance gently with a hammer or rubber mallet. It will assist to seat the drawer entrance securely within the grooves.
- Apply a skinny bead of glue to the again of the drawer entrance. It will assist to offer further help and forestall the drawer entrance from turning into unfastened.
- Use a drill or screwdriver to insert screws by means of the holes within the drawer entrance and into the drawer. It will completely connect the drawer entrance to the drawer.
- Wipe away any extra glue or sawdust.
To make sure the drawer entrance is completely aligned, you need to use a straight edge or ruler to measure the gap between the sides of the entrance and the perimeters of the drawer. Modify the location of the drawer entrance as wanted till it’s completely centered.
How To Take away The Drawers From A Dresser
Dressers are a standard piece of furnishings in lots of houses, and so they can be utilized to retailer quite a lot of objects. Drawers are an vital a part of dressers, however they’ll typically develop into caught or tough to take away. If you want to take away the drawers out of your dresser, there are a number of easy steps you possibly can comply with.
First, open the drawer all the way in which. Subsequent, search for a small lever or button on the aspect of the drawer. This lever or button will launch the drawer from the dresser. After getting discovered the lever or button, press it and pull the drawer out.
In case your dresser doesn’t have a lever or button, you might want to make use of a screwdriver to take away the drawers. To do that, insert the screwdriver into the small gap on the aspect of the drawer and switch it. It will launch the drawer from the dresser.
Individuals Additionally Ask About How To Take away The Drawers From A Dresser
What if I am unable to discover the lever or button to launch the drawer?
If you cannot discover the lever or button to launch the drawer, you might want to make use of a screwdriver to take away it. To do that, insert the screwdriver into the small gap on the aspect of the drawer and switch it. It will launch the drawer from the dresser.
Can I take away the drawers from my dresser with out damaging it?
Sure, you possibly can take away the drawers out of your dresser with out damaging it. Nonetheless, you will need to watch out when doing so. Keep away from utilizing extreme drive, and all the time make it possible for the drawer is absolutely open earlier than trying to take away it.
How do I put the drawers again in my dresser?
To place the drawers again in your dresser, merely line up the drawer with the tracks on the aspect of the dresser and slide it in. As soon as the drawer is in place, press down on it to make it possible for it’s safe.
