4 Easy Steps to Remove a Drawer from a Dresser

Drawer Removal from Dresser

Taking out a drawer from a dresser could appear to be a easy job, however it may be difficult if you do not know the correct method. Should you attempt to drive the drawer out, you could possibly injury the dresser or the drawer itself. Nevertheless, with the fitting method, you may take away a drawer shortly and simply. Here is a step-by-step information that can assist you do it safely and effectively.

First, be sure that the drawer is totally empty. Any gadgets left within the drawer may get broken while you take away it. As soon as the drawer is empty, find the drawer slides. These are normally steel tracks that the drawer slides on while you open and shut it. There shall be two drawer slides, one on both sides of the drawer. To take away the drawer, it’s essential to disengage it from the drawer slides.

To disengage the drawer from the drawer slides, pull the drawer out so far as it’s going to go. Then, search for a lever or tab on the drawer slides. This lever or tab will launch the drawer from the slides. After getting discovered the lever or tab, push it in whereas pulling the drawer in the direction of you. The drawer ought to now come free from the dresser. If the drawer is caught, you could want to make use of a flathead screwdriver to pry it free. Watch out to not injury the drawer or the dresser when utilizing a screwdriver.

Disengaging the Drawer Stops

The drawer stops are normally positioned on the within of the drawer’s sides. They usually slide backwards and forwards alongside a observe. To disengage them, you have to to push the drawer stops towards the again of the dresser. This may let you pull the drawer out additional.

Listed below are some extra particulars on how you can disengage the drawer stops:

  • Find the drawer stops. Drawer stops are normally small, plastic or steel tabs that latch onto the drawer slides. They’re positioned on the within fringe of the drawer, close to the entrance.
  • Push the drawer stops towards the again of the dresser. This may launch the drawer from the slides, permitting you to tug it out additional.
  • Watch out to not drive the drawer. Should you drive the drawer, you could possibly injury the drawer stops or the slides.
  • In case you are having hassle disengaging the drawer stops, you could want to make use of a screwdriver or pliers.

Drawer Disassembly Desk

Step Description
1 Take away the drawer from the dresser.
2 Find the drawer stops on the within of the drawer.
3 Push the drawer stops towards the again of the dresser.
4 Pull the drawer out additional.

Lifting the Drawer Vertically

To carry the drawer vertically, observe these steps:

  1. Open the drawer utterly. This will provide you with extra room to work with when lifting the drawer.
  2. Find the drawer slides. Drawer slides are usually positioned on the perimeters of the drawer and are manufactured from steel or plastic. They permit the drawer to slip out and in of the dresser easily.
  3. Carry the drawer up and out of the dresser. After getting positioned the drawer slides, grip the drawer firmly on each side and carry it up and out of the dresser, utilizing a swift and even movement. It is essential to watch out to not carry the drawer too shortly or erratically, as this might trigger it to tip over or injury the drawer slides.
    Lifting Path Suggestions
    Upward Use each palms to carry the drawer straight up, protecting it degree.
    Vertically Carry the drawer up and out at a slight angle, following the angle of the drawer slides.
    Parallel Carry the drawer straight up, parallel to the perimeters of the dresser. This technique is appropriate for drawers with comparatively low friction on the slides.

Eradicating the Drawer from the Body

After getting recognized the drawer stops or catches, you may take away the drawer from the body by following these steps:

1. Place the Drawer

Pull the drawer out so far as it’s going to go with out eradicating it.

2. Find the Drawer Stops

Search for small steel tabs or levers on the again corners of the drawer. These are the drawer stops that maintain the drawer in place.

3. Disengage the Drawer Stops

There are two frequent varieties of drawer stops:

  • **Lever-type stops:** Press down on the lever and pull the drawer ahead.
  • **Tab-type stops:** Push the tab down and pull the drawer ahead.

4. Launch the Drawer

As soon as the drawer stops are disengaged, gently pull the drawer straight in the direction of you till it’s utterly out of the body.

5. Be Cautious In regards to the Slide Rails

As you pull out the drawer, be aware of any slide rails or tracks which may be hooked up to it. Gently carry the drawer up and away from the rails to keep away from damaging them.

Sort of Drawer Slide Rail Sort
European-style drawers Curler slides or ball bearing slides
American-style drawers Picket rails or steel rails

Avoiding Injury throughout Elimination

6. Take away the Drawer Rigorously

That is probably the most delicate step, so it is important to proceed with utmost care. Firmly grip the drawer on each side, protecting your fingers away from edges or handles. Gently pull the drawer straight out of the dresser body, sliding it backwards and forwards barely till it detaches totally.

If the drawer appears caught, keep away from utilizing extreme drive. As a substitute, verify for any potential obstructions, reminiscent of clothes or equipment, that could be blocking its path. Rigorously take away the objects and check out once more.

If the drawer stays unresponsive, do not hesitate to hunt skilled help from a furnishings restore specialist. They’ve the experience and instruments to securely extract the drawer with out inflicting any injury.

Here is a useful trick: You need to use masking tape to guard the sides of the drawer and body from potential nicks or scratches through the elimination course of.

Suggestions Cautions
Use masking tape for cover Keep away from extreme drive
Take away obstructions Do not pull on handles
Slide the drawer gently Search skilled assist if caught

Reattaching the Drawer Stops

Drawer stops are small plastic or steel items that assist to maintain drawers from being pulled out too far. If drawer stops turn into indifferent, you may simply reattach them utilizing the next steps:

  1. Find the holes the place the drawer stops had been initially hooked up.
  2. If the holes are stripped, you could have to drill new ones.
  3. Apply a small quantity of wooden glue to the drawer cease.
  4. Insert the drawer cease into the opening and faucet it into place with a small hammer.
  5. Repeat the method with the opposite drawer cease.
  6. Open and shut the drawer a couple of occasions to be sure that the stops are working correctly.
  7. If the stops are free, you may add a small washer between the cease and the drawer.
  8. If the stops are too tight, you may file them down slightly bit.
Drawer Cease Sort The best way to Reattach
Plastic Push into place
Metallic Faucet into place with a hammer

Aligning the Drawer Correctly

As soon as the drawer is totally faraway from the dresser, you may align it correctly. That is essential to make sure that the drawer slides out and in easily, with out inflicting any injury to the dresser or the drawer itself.

To align the drawer correctly, observe these steps:

1. Find the drawer slides on the perimeters of the dresser. These are normally steel rails that the drawer slides on.
2. Insert the drawer into the dresser by aligning it with the drawer slides.
3. Push the drawer in till it stops.
4. Examine the alignment of the drawer. It ought to be flush with the entrance of the dresser and degree with the opposite drawers.
5. If the drawer is just not aligned correctly, alter the drawer slides accordingly.
6. As soon as the drawer is aligned correctly, tighten the screws that maintain the drawer slides in place.
7. Take a look at the drawer to be sure that it slides out and in easily.
8. If the drawer nonetheless doesn’t slide easily, you could have to lubricate the drawer slides with a dry lubricant reminiscent of graphite.
9. Troubleshooting Drawer Alignment:

In case you are having hassle aligning the drawer correctly, listed here are some troubleshooting ideas:

Drawback Answer
The drawer is just not flush with the entrance of the dresser. Modify the drawer slides in order that the drawer is evenly spaced on each side.
The drawer is just not degree with the opposite drawers. Modify the drawer slides in order that the drawer is on the identical peak as the opposite drawers.
The drawer doesn’t slide out and in easily. Lubricate the drawer slides with a dry lubricant reminiscent of graphite.

How To Take Out A Drawer From A Dresser

Taking out a drawer from a dresser is an easy job that may be accomplished in a couple of minutes. Comply with these steps to take away a drawer safely and simply:

  1. **Open the drawer utterly.** This will provide you with entry to the drawer slides.
  2. **Find the drawer slide levers.** These levers are normally positioned on the perimeters of the drawer slides, close to the again of the drawer.
  3. **Press down on the drawer slide levers.** This may launch the drawer from the slides.
  4. **Pull the drawer out of the dresser.** Watch out to not pull too laborious, as you could possibly injury the drawer or the dresser.

Folks Additionally Ask About How To Take Out A Drawer From A Dresser

What instruments do I have to take out a drawer from a dresser?

You’ll not want any instruments to take away a drawer from a dresser. The drawer slides are designed to be launched by hand.

How do I put a drawer again in a dresser?

To place a drawer again in a dresser, merely reverse the steps above. First, align the drawer slides with the slots within the dresser. Then, push the drawer in till it clicks into place.

What if I can not get the drawer out of the dresser?

In case you are unable to get the drawer out of the dresser, it’s doable that the drawer slides are jammed. You possibly can attempt to loosen the slides by gently tapping them with a hammer. If this doesn’t work, you could have to name an expert that can assist you take away the drawer.